NBN Technician Perth

• technician
• NBN
• Fibre
• FTTP
• Repairs
• New Socket
• ACMA registration
• authorised
• FTTC
• FTTB
• HFC

Mr Telco Perth NBN Repair Process:

Verify incoming active internet services from the NBN Service Provider Network.

 Detect and fix any intermittent issues with NBN cabling that may be causing disruptions to your internet connection.

 Inspect all home wall outlets for signs of corrosion or wear and carry out necessary repairs.

Assess the NBN modem/router cables, connections, and wiring for potential faults (NBN-compatible routers can be supplied if required).

 Deliver on-site NBN Internet Service Fault Analysis and Speed Test with Instant PDF Reporting.

If your NBN connection is down or you're experiencing frequent dropouts or reduced speeds due to NBN’s network, you’ll need to consult Perth-based internet repair professionals (NBN Certified technicians) who are fully equipped with specialized NBN testing tools (VDSL, Ethernet, FTTH, FTTB, FTTC, HFC) to pinpoint and fix any internal connection issues across all types of NBN-supported services.

Mr Telco’s certified NBN technicians use advanced diagnostic tools and provide immediate reporting, offering a more sophisticated service than other internet repair companies in Perth and across Australia.

We repair multiple internet technologies available in Perth's metro and regional areas, including NBN, as detailed below.

FTTP (Fibre to the Premises):

Replace green SC/A fibre connectors at either the PCD (outside wall) or NTD (inside your property).
Repair broken fibre cables between the PCD and the NTD (fibre splicing).
Install a new fibre cable between the PCD and NTD, ready with new connectors.
Test FTTP services using a red light source and OTDR to ensure reliable connection.

HFC (Hybrid Fibre Coaxial):

Measure for any attenuation affecting service quality.
Replace defective RG6 connectors located behind wall sockets, the PCD, or pit.
Remove faulty splitters, isolators, and attenuators.
Install or repair HFC cables from the PCD to your wall socket.
Repair or replace HFC cables from the PCD to the pit.

FTTC or FTTB (VDSL):

Detect and remove bridge taps on your telephone line.
Replace FTTC-compatible internet telephone sockets.
Remove star wiring or multiple home hub connections.
Conduct a TDR test from your wall socket to the NBN network.
Install new telephone cables from your socket to the street.

Apartment Services in Perth:

Test NBN services directly from wall plates in apartments.
Trace and resolve faults between your apartment, IDF, and MDF.
Replace or install fibre, telephone, or HFC cabling.
Repair or reconnect bad connection points, eliminating bridge taps.

Underground & Conduit Repairs:

Identify underground cable breaks using sonar.
Excavate around faulty locations to expose damaged conduits.
Install new conduits or provide spot fixes and reinstate the area.

Mr Telco's technicians can perform the following repairs or replacements on your NBN connection.

At the end of your service, Mr Telco will provide a comprehensive fault report and speed test results in an instant PDF format upon request.